SHURflo Accumulator Tank 620mL · 1/2 inch Male BSP Connections

Description

The SHURflo accumulator tank is a bladder-type pressure storage vessel and pulsation dampener designed to hold water under pressure. Its pre-charged air chamber stores a small reserve of water, helping a pressure-switch-controlled pump run less frequently and smoothing flow between pump cycles.

The 620mL rating is the total air-and-water volume, not the usable water reserve. Stored water is typically about 60-120mL, depending on the pre-charge and the pump's switching pressures.

For best performance, set the air pre-charge to the pump's cut-in pressure-the pressure at which it starts-not its cut-out pressure. Check and adjust it with the pump switched off and a tap open to release water pressure.

Features

• Reduces pump on-off cycling and water-flow pulsation.
• Pre-charged bladder design maintains a pressurised water reserve between pump cycles.
• Not recommended for SMART sensor pumps.
• 1 year warranty.

Specifications

• Manufacturer Part Number: 182-200
• Brand: SHURflo
• Barcode: 754009930
• Pre-Charge Pressure: 30 PSI.
• Max Working Pressure: 125 PSI.
• Total Volume: 620mL, including air and water.
• Diameter: 95mm.
• Length: 22cm.
• Connections: 1/2 inch BSP male inlet and outlet.
• Includes: accumulator tank and dual swivel connector.
• Installation: after the pump, before filters or check valves that add backpressure; either port can be used as the inlet.
• Fitting seal: seals on the internal port taper, not on the threads.
• Shipping Weight: 630 grams.
• Shipping Dimensions: 29 cm x 12 cm x 14 cm.

Community Photos

Connections

This product connects to other products that we sell. It has the following connections:

• MALE-BSP-1/2-WATER

Click to Show Connecting Products